無論是進口車貿易商進口車輛或個人自用車運回台灣除了要通過繁雜昂貴的驗車程序，通過之後還需要向政府主管機關申請合格證明。
申請噪音合格證明應檢具之文件如下：
二、「汽車新車型噪音審驗合格證明」草稿。
三、汽車規格表。
四、原製造廠型錄或技術資料（進口車應檢具）。
五、車外噪音防制對策。
六、原製造廠車身防音打造技術說明書及示意圖（大客車、大貨車應檢具）。
七、汽車噪音車型組代表車選定審查表。
八、中央主管機關指定之檢驗測定機構新車型審驗測定車噪音測定報告。
九、該審驗汽車海關進口與貨物稅完（免）稅證明書影本、提貨單影本（僅進口車應檢具）。
十、相片：
（一）轎車、旅行車、小客車、小貨車九式一份：左前、左後、右前、右後、引擎室、引擎蓋、駕駛室（含排檔桿）、底盤、消音器
（二）大貨車十一式一份：左前、左後、右前、右後、駕駛室（含排檔桿）、前底盤、後底盤、引擎室俯視及側視、引擎蓋、消音器。
（三）大客車十二式一份：左前、左後、右前、右後、駕駛室（含排檔桿）、前底盤、後底盤、引擎室及其內側四周、引擎蓋。
（四）機車五式一份：前、後、左、右、引擎室。
十一、附貼汽車之標識（應登載測定轉速及原地噪音審驗值）。
十二、汽車製造廠提供之證明文件：授權國內指定代理人之授權書（該授權書應賦予國內指定代理人全權代表該車輛製造廠，且皆需負擔完全相同之責任）、合格證明沿用聲明（申請新車型合格證明者免附）、引擎限速聲明（三．五公噸以下汽、柴油車可由進口商公會提出）等。
十四、公司登記表影本、營利事業登記證影本（第一次申請時應檢具）。
十五、公會登記文件（指由公會申請者第一次申請時應檢具，但十四項不必檢具）。
十六、申請之汽車若已取得歐盟國家核發之合格證明，符合歐盟現行管制標準，除前述相關資料外，得檢具下列資料向中央主管機關提出申請合格證明及合格證明沿用。
（一）歐盟國家核發之合格證明文件影本。
（二）以歐盟現行測定方法執行之汽車噪音測定報告。
（三）汽車製造廠聲明申請進口之汽車與國外原車型為完全相同之車輛組成型態，具有相同之噪音特性。
十七、汽車製造廠指定代理人申請合格證明而該進口車輛車型名稱與所持國外認證資料名稱不同時，應另行檢具下列文件向中央主管機關申請：
（一）由汽車製造廠或代理商提供原廠證明函文。
（二）提供該車型組及車外噪音防制設備相關資料說明。
貳、廠商將代表車輛送測同時應檢具前項壹之三、九、十、十二之引擎限速聲明、十三等文件二份供中央主管機關指定之檢驗測定機構核對，檢驗測定機構於測定完成後將該文件一份併同測定報告函送中央主管機關審驗。
參、填寫表格：Applications for compliance certification shall include the following documents:
2 copies of application form for vehicle configuration noise testing in duplicate.
Draft of motor vehicle new vehicle model noise inspection compliance certification.
Motor vehicle specifications form.
Catalog or technical information (on imported vehicles) from the original manufacturer.
Description of vehicle external noise control countermeasures.
Manual and schematic diagrams for anti-noise technology installed by original manufacturer (for buses and trucks).
Selection review form for representative vehicle of a vehicle configuration for motor vehicle noise testing.
Vehicle noise testing report for new vehicle model inspection and testing from a central competent authority approved analysis laboratory.
Photocopies of import and commodities tax payment (or exemption) certificate issued by the customs authority and bill of lading for said motor vehicle undergoing inspection and testing.
Photographs:
For sedans, station wagons, minibuses and small trucks (one copy for each): rear-left, front-left, rear-right, front-right, engine bay, hood, driver's cab (including gear shift), chassis, muffler;
For large trucks (one copy for each): rear-left, front-right, rear-right, front-right, driver's cab (including gear shift), rear chassis, front chassis, overview and lateral view of engine bay, hood, and muffler;
For buses (one copy for each): rear-left, front-left, rear-right, front-right, driver's cab (including gear stick), rear chassis, front chassis, inside and four sides of engine bay, and hood; and
for motorcycles (one copy for each): rear, front, right, left, and engine bay.
Labeling attached to the motor vehicle (shall include testing engine speed and original noise testing values).
Certification documents provided by the motor vehicle manufacturer: Power of attorney authorizing the domestic designated agent (this letter of attorney shall endow the domestic designated agent with complete power of representation for said vehicle manufacturer and who must bear full responsibility as such); compliance certification renewal statement (not required for applicants of new vehicle model compliance certification); statement of engine's speed limitations (to be submitted by the importers association for gasoline and diesel vehicles under 3.5 tons).
Noise improvements and countermeasures as approved by the central competent authority (to be submitted by those not complying with noise control standards).
Copies of company registration and business license (for first-time applications).
Association registration documentation (for applicants applying through an association for the first time; Paragraph 14 documents not then required).
Applicants for motor vehicles that have already been issued compliance certification from European Union countries and that comply with current European Union noise control standards, in addition to the foregoing required information, may submit the following information to the central competent authority when applying for compliance certification and the renewal thereof:
Photocopies of compliance certification documentation issued by the European Union country;
Report on motor vehicle noise testing methods currently in effect in the European Union country; and
An affidavit from the motor vehicle manufacturer stating that the imported motor vehicle of said application is identical with the original overseas vehicle model and configuration and that it has identical noise features.
If a designated agent for a motor vehicle manufacturer is applying for compliance certification and the imported vehicle model name on the application is different than the model name under which the overseas certification was granted, the designated agent shall submit the following additional documents to the central competent authority when making said application:
Documented letter from the original manufacturer provided by the motor vehicle manufacturer or dealership; and
Relevant explanatory information on the vehicle configuration and external vehicle noise control equipment.
When providing representative vehicle(s), manufacturers shall submit documents pursuant to the engine speed limits of Paragraphs 1-3, 1-9, 1-10 and the engine speed limits of Paragraph 1-12 and pursuant to Paragraph 1-13 to the central competent authority appointed analysis laboratory for checking. After testing has been completed, the analysis laboratory shall submit said documents along with the testing report to the central competent authority for inspection.
2 copies of application form for vehicle configuration noise testing in duplicate.
Draft of motor vehicle new vehicle model noise inspection compliance certification.
Motor vehicle specifications form.
Catalog or technical information (on imported vehicles) from the original manufacturer.
Description of vehicle external noise control countermeasures.
Manual and schematic diagrams for anti-noise technology installed by original manufacturer (for buses and trucks).
Selection review form for representative vehicle of a vehicle configuration for motor vehicle noise testing.
Vehicle noise testing report for new vehicle model inspection and testing from a central competent authority approved analysis laboratory.
Photocopies of import and commodities tax payment (or exemption) certificate issued by the customs authority and bill of lading for said motor vehicle undergoing inspection and testing.
Photographs:
For sedans, station wagons, minibuses and small trucks (one copy for each): rear-left, front-left, rear-right, front-right, engine bay, hood, driver's cab (including gear shift), chassis, muffler;
For large trucks (one copy for each): rear-left, front-right, rear-right, front-right, driver's cab (including gear shift), rear chassis, front chassis, overview and lateral view of engine bay, hood, and muffler;
For buses (one copy for each): rear-left, front-left, rear-right, front-right, driver's cab (including gear stick), rear chassis, front chassis, inside and four sides of engine bay, and hood; and
for motorcycles (one copy for each): rear, front, right, left, and engine bay.
Labeling attached to the motor vehicle (shall include testing engine speed and original noise testing values).
Certification documents provided by the motor vehicle manufacturer: Power of attorney authorizing the domestic designated agent (this letter of attorney shall endow the domestic designated agent with complete power of representation for said vehicle manufacturer and who must bear full responsibility as such); compliance certification renewal statement (not required for applicants of new vehicle model compliance certification); statement of engine's speed limitations (to be submitted by the importers association for gasoline and diesel vehicles under 3.5 tons).
Noise improvements and countermeasures as approved by the central competent authority (to be submitted by those not complying with noise control standards).
Copies of company registration and business license (for first-time applications).
Association registration documentation (for applicants applying through an association for the first time; Paragraph 14 documents not then required).
Applicants for motor vehicles that have already been issued compliance certification from European Union countries and that comply with current European Union noise control standards, in addition to the foregoing required information, may submit the following information to the central competent authority when applying for compliance certification and the renewal thereof:
Photocopies of compliance certification documentation issued by the European Union country;
Report on motor vehicle noise testing methods currently in effect in the European Union country; and
An affidavit from the motor vehicle manufacturer stating that the imported motor vehicle of said application is identical with the original overseas vehicle model and configuration and that it has identical noise features.
If a designated agent for a motor vehicle manufacturer is applying for compliance certification and the imported vehicle model name on the application is different than the model name under which the overseas certification was granted, the designated agent shall submit the following additional documents to the central competent authority when making said application:
Documented letter from the original manufacturer provided by the motor vehicle manufacturer or dealership; and
Relevant explanatory information on the vehicle configuration and external vehicle noise control equipment.
When providing representative vehicle(s), manufacturers shall submit documents pursuant to the engine speed limits of Paragraphs 1-3, 1-9, 1-10 and the engine speed limits of Paragraph 1-12 and pursuant to Paragraph 1-13 to the central competent authority appointed analysis laboratory for checking. After testing has been completed, the analysis laboratory shall submit said documents along with the testing report to the central competent authority for inspection.
運車回台灣推薦閱讀：
- 台灣主要外匯車商之一專業代辦進口車到台灣服務，為什麼進口代辦外匯車商推薦Car2TW呢？請參閱Car2TW評價
- 加拿大美國華僑留學生個人運車回台灣流程及費用計算?台灣進口車關稅稅金要多少?那些車運回台灣才划算?自辦進口美國買車回台灣流程手續
- 帶車回台灣,輕鬆又划算,美國帶車回台灣注意事項有哪些呢,華僑留學生運車回台灣划算嗎?關稅有減免嗎?如何計算進口車台灣稅金呢？代辦進口車回台灣划算嗎？
- 加拿大美國華僑留學生運車回台灣費用及流程及關稅計算說明及注意事項或進口外匯車價格計算及利潤
- 台灣汽車進口關稅進口車稅率計算查詢外匯車商進口外匯車關稅奢侈稅計算及華僑留學生運車進口回台灣關稅計算公式
- 運車回台灣風險及注意事項,自用車運回台灣流程及從美國買車回台灣的風險評估及費用計算
- 個人自用運車回台灣或美國買車回台灣費用包含海運費用台灣關稅及車測費用計算
- 如何從美國加拿大日本等海外國家運車回台灣流程說明注意事項簡介
- 外匯車商美國買車回台灣或是華僑留學生自用車從加拿大美國運車回台灣風險及注意事項
- Car2TW美國買車代購及華僑留學生代辦運車回台灣
- 外匯車商及個人運車回台灣車輛檢測(ARTC車測中心)重大法規改變:申請油耗合格證明必須採用歐盟EU測試程序，可能被影響的進口車輛請參閱此, 車測費用及時間增加及油耗測試美規歐規有哪些差別
- 自己在美國買車或託朋友買車，自己安排物流運車回台灣，自辦進口汽車再交給貴公司處理後續報關驗車可以嗎? 留學生運車回台灣費用及加拿大或美國買車回台灣及流程及關稅計算公式？